PJ-723

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 19.08.2024
  • ID: faqp00100577_000

Although "Auto Power On" or "Power On When Plugged in" is set to On in the Printer Setting Tool, the printer does not turn on automatically.

Your printer's design assumes that you leave it plugged in for an extended period of time - for example, you turn it on when you start work in the morning and turn it off when you finish work in the evening.
Due to the energy-saving design of the circuits, the printer requires some time before it turns on automatically after you plug the printer in again soon after unplugging it.
The length of time required for your printer to turn on automatically soon after being unplugged depends on your printer's model and the voltage - refer to the table below for this information.

Printer Model Power Supply
100 V 200 V
TD-4550DNWB 20 minutes maximum 20 minutes maximum
QL-820NWB/820NWBc 39 seconds maximum 75 seconds maximum
PJ-722/723/762/763/763MFi/773
PT-E800T/E800TK/E800W/E850TKW
PT-P900/P900W/P950NW
QL-800
QL-1100/1100c/1110NWB/1110NWBc
TD-2020/2120N/2130N		 40 seconds maximum 90 seconds maximum
TD-2020A/2030ABK/2125N/2125NWB/2135N/2135NWB 120 seconds maximum
TD-2310D/2320D/2320DF/2320DSA/2350D/2350DF/2350DSA 80 seconds maximum

 

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PJ-722, PJ-723, PJ-762, PJ-763, PJ-763MFi, PJ-773, PT-P900W, PT-P950NW, QL-1110NWB, QL-800, QL-820NWB, TD-2020/2020A, TD-4550DNWB

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit