Innov-is XJ1
FAQs & Troubleshooting
The App shows the message "Connection to the machine failed. Please reestablish the connection between the device and the machine."
This message is displayed when the WLAN connection to the machine could not be established due to poor WLAN condition.
Check if the wireless connection from the smart device to the machine is working properly.
Make sure that the wireless connection function is enabled on the machine.
Check the following FAQ and Manuals to enable the wireless connection.
⇒ How to set up the wireless network connection with the wizard on the machine
⇒ Go to the Manuals section
Make sure the smart device's Wifi connection is enabled. And make sure if it connect with same network as machine.
If the wireless connection is disconnected, connect again.
The wireless connection condition is poor.
Bring the connected device and machine closer to the access point installation location.
Try the communication in a place where there are few obstacles between the access point, the device and the machine.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models Innov-is XJ1
Content Feedback
To help us improve our support, please provide your feedback below.
Getting Ready Sewing (Utility Stitches) Sewing (Character Decorative Stitches) Embroidering Operation Accessories Maintenance One Point Advice General Information Others Network Setting Sewing (Utility Stitches) Sewing (Character Decorative Stitches) Embroidering Preparation Operation Software Error messages General Problem Network Setting Instructional videos My Stitch Monitor My Design Snap Artspira
Error Messages General Question Troubleshooting
Upper Threading Bobbin (Winding/Installing) Threading Presser foot Needle/Thread/Fabric Before Embroidering How to use (Video FAQs) Others
Presser foot Needle/Thread/Fabric Tips for sewing How to use (Video FAQs)
Needle/Thread/Fabric Tips for sewing
Embrodery patterns Needle/Thread Fabric/Stabilizer Embrodery frame Embroidery Edit Tips for embroidering How to use (Video FAQs)
Basic Operation Memory function Machine's Settings How to use (Video FAQs) Others
Accessories How to use (Video FAQs)
Cleaning Oiling Maintenance message How to care and maintenance (Video FAQs) Others
One Point Advice
General Information
Tips for Network Settings
Others
Problems during sewing Sewing result Foot controller
Problems during sewing Sewing result
Problems during embroidering Embroidering result Pattern's selection and editing Embroidery data
Bobbin (Winding/Installing)
Machine's Settings
Layout & Editing Embroidery data
Error Message on Machine's Display
General Problem
Wireless Network Settings
Getting Ready (Video) Operation (Video) Sewing (Video) Embroidering (Video) Optional feet (Video) General sewing accessories (Video) Care and Maintenance (Video)
General Question Instructional videos How to Troubleshooting Error Messages
General Question Instructional videos How to Troubleshooting Error Messages