CM900
![]() |
常見問題&故障排除 |
Scanning cannot be done cleanly (there are lines in the scanned image).
Possible Causes (or Results)
Case1 : The scanner glass is dirty.
Case2 : The original to be scanned is dirty or scratched.
Solutions
----- Case1 -----
Clean the scanner glass from the bottom of the machine.
-
While pushing in the tab at the bottom of themachine, pull up on the cover.
-
Dampen a soft lint-free cloth with water and firmly wring it out, and then wipe the scanner glass at the inside on the bottom of the machine.
>> For details, see “Cleaning the scanner glass”.
----- Case2 -----
In “Direct Cut” or “Scan to Cut Data” mode, remove thin lines or dirt in the image editing screen.
>> For details, see “Editing Pictures”.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質