Innov-is A80
常見問題&故障排除 |
"E8" message appears on the LCD.
Cause
This message is displayed when (Twin needle) is turned on, and a stitch pattern that cannot be sewn with the twin needle is selected.
Solution
-
When you want to sew a pattern you selected :
Switch to the single needle mode, and replace the twin needle with a single needle before continuing the operation.
To switch to the needle mode, press (the needle mode selection key ).
The twin needle mode indicator changes to the single needle mode.
-
When you want to sew with the twin needle :
Select a pattern that can be sewn with the twin needle.
Refer to Stitch Chart on the operation manual to learn stitches that can be sewn with a twin needle.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質