Innov-is A80
![]() |
常見問題&故障排除 |
"E1" message appears on the LCD.
Cause
This message is displayed when an erroneous operation is performed as follows.
- The Start/Stop button is pressed while the presser foot is raised.
- The Reverse/Reinforcement stitch button is pressed while the presser foot is raised.
- The foot controller is pressed while the presser foot is raised.
Solution
Lower the presser foot lever before continuing the operation.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質