DCP-T710W

FAQs & Troubleshooting

FAQs & Troubleshooting

Save Scanned Data to a Folder as a PDF File

Scan documents and save them to a folder on your computer as PDF files.

Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use either ControlCenter4 (Windows®) or Brother iPrint&Scan (Mac) software.

DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W

  1. Load your document.
  2. Press (SCAN).
  3. Press or to select the [Scan to PC] option, and then press OK.
  4. Press or to select the [File] option, and then press OK.
  5. If the machine is connected over the network, press or to select the computer where you want to send data, and then press OK.

    If the LCD prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the computer, and then press OK.

  6. Do one of the following:
    • To change the settings, press Options or Copy / Scan Options, and then go to the next step.
    • To use the default settings, press Mono Start or Colour Start.
      • [Scan Type] depends on the default settings. Pressing Mono Start or Colour Start does not allow you to change the settings.
      • To use scan options, a computer with either ControlCenter4 (Windows®) or Brother iPrint&Scan (Mac) software installed must be connected to the machine.
  7. The machine will prompt you to set each of the following scan settings. Press or to select the desired option, and then press OK to proceed to the next scan setting.
    • [Scan Type]
    • [Resolution]
    • [File Type]
    • [Document Size]
    • [Remove Bkg Clr]
  8. Press Mono Start or Colour Start.
    [Scan Type] depends on the settings you have selected. Pressing Mono Start or Colour Start does not change the settings.

MFC-T910DW

  1. Load your document.
  2. Press (SCAN).
  3. Press or to select the [to PC] option, and then press OK.
  4. Press or to select the [to File] option, and then press OK.
  5. If the machine is connected over the network, press or to select the computer where you want to send data, and then press OK.

    If the LCD prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the computer, and then press OK.

  6. Do one of the following:
    • To change the settings, go to the next step.
    • To use the default settings, press Mono Start or Colour Start.
      [Scan Type] depends on the default settings. Pressing Mono Start or Colour Start does not allow you to change the settings.
  7. Press or to select the [Scan Settings] setting, and then press OK.

    To use the [Scan Settings] option, a computer with either ControlCenter4 (Windows®) or Brother iPrint&Scan (Mac) software installed must be connected to the machine.

  8. Press or to select the [Set at Device] setting, and then press OK.
  9. Select the scan settings you want to change, and then press OK.
    Option
    Description
    Scan Type

    Select the scan type for your document.

    Resolution

    Select the scan resolution for your document.

    File Type

    Select the file format for your document.

    Document Size

    Select your document size.

    Brightness

    Select the brightness level.

    Contrast

    Select the contrast level.

    Remove Background

    Change the amount of background colour that is removed.

  10. Press Mono Start or Colour Start.
    [Scan Type] depends on the settings you have selected. Pressing Mono Start or Colour Start does not allow you to change the settings.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T510W, DCP-T710W, MFC-T810W, MFC-T910DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.