The message Replace Roller indicates that the Pick-up Roller needs to be replaced with a new one.

Your machine is equipped with a scan counter. The counter automatically counts how many times the machine has scanned. When the machine scans 50,000 times, the machine will display a message Replace Roller to remind you to replace the Pick-up Roller.

Please follow the steps below to replace the Pick-up Roller:

1. Open the Top Cover (1) then the Front Cover (2) by pulling the Cover Release Lever (3) toward you.
   

    

2. Press the tab on each side of the Pick-up roller cover toward the center of the cover (1) and then pull the cover down.
   
   

    

3. Slide the Pick-up Roller (1) all the way to the right.
   
   

    

4. The holder of the Pick-up Roller has a narrow opening, and the shape of the shaft of the Pick-up Roller matches this opening. Rotate the Pick-up Roller until you can fit the shaft into the opening of the holder.
   
   
    
5. Hold and pull the Pick-up Roller out of the machine.
   
   
    
6. Place a new Pick-up Roller into the machine.

   Identify the left and right sides of the Pick-up Roller are oriented correctly before attaching it. The left end of the shaft is slotted.

   

    

7. Slide the Pick-up Roller (1) to the left edge while turning the Pick-up Roller.
   
   
    
8. Close the Pick-up Roller Cover.
    
9. Close the Front Cover and the Top Cover.
    
10. Reset the counter. Follow the steps below to reset the usage counter.
    1. Press  .
        
    2. Press Machine Info.
        
    3. Press Usage Counters.
        
    4. To reset the counter for the Pick-up Roller, press Pick-up Roller Count.
        
    5. The LCD shows the confirmation message. Press Yes.
    6. Press  .