MFC-L8390CDW
![]() |
常見問題&故障排除 |
Verify if the Brother machine has a dial tone.
To verify your Brother machine has a dial tone, follow the steps below:
- Plug the telephone line cord into your Brother machine (labeled "LINE" for some countries), and then plug the other end directly into the wall telephone jack (socket).
-
Check for a dial tone.
-
Do one of the following:
- When Fax Preview is set to off or nothing, press Fax.
- When Fax Preview is set to on, press Fax and Sending Faxes.
-
Check your Brother machine has Hook or Tel.
- If your Brother machine has Hook, press it, and listen for a dial tone. Verify the speaker volume is turned up.
- If your Brother machine has Tel, you can check for a dial tone by connecting an external phone to the jack (socket) labeld EXT.
Or, follow the steps below:
-
Check that the speaker volume is set to LOW, NORMAL (Med) or HIGH (not OFF).
-
Do one of the following:
- When Fax Preview is set to off or nothing, press Fax.
- When Fax Preview is set to on, press Fax and Sending Faxes.
-
Press any key on the dial pad.
-
Press Fax Start or Start.
When the LCD asks color setting, choose Black (Mono). (For some models only)
When the LCD asks Send/Receive, press Send.
The machine scans from the flatbed.
-
When the message Next Page Yes/No is displayed, press NO.
- Listen for a dial tone when the machine starts to dial.
-
Do one of the following:
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質