DCP-375CW

FAQs & Troubleshooting

FAQs & Troubleshooting

When I make a copy the image or text is cut off.

This issue may occur if the document is placed incorrectly on the flat scanner glass, the paper is loaded incorrectly in the paper tray or the paper size setting is not programmed correctly.

 

Place the document on the flat scanner glass correctly

If you use the scanner glass, place the document you want to copy face down on the flat scanner glass.
Use the document guide lines in the upper-left corner of the flat scanner glass to help you position your document.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
 

Flat_Scanner_Glass01

 

 

Loading the paper into the tray correctly

Regardless of the paper size you are using, you must always load the paper into the paper tray so that the two longer edges of the paper face the left and right sides of the paper tray and the two shorter edges of the paper face the front and back of the paper tray.

If you are standing in front of the paper tray, the paper should be in portrait orientation, NOT landscape orientation.

 

> To adjust your Brother machine's paper tray for paper, refer to the instructions, "How do I load paper?".

 

Setting the Paper Size

When you change the size of the paper you load into your Brother machine, you must also change the paper size setting.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-195C, DCP-375CW, DCP-J140W, MFC-255CW, MFC-295CN, MFC-5490CN, MFC-5890CN, MFC-J430W, MFC-J5910DW, MFC-J625DW, MFC-J6510DW, MFC-J825DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.