DCP-J1050DW
 |
常見問題&故障排除 |
No Paper / No Paper Fed
There are several reasons that the Brother machine displays No Paper, No Paper Fed. Check the following points to clear the No Paper, No Paper Fed message.
Cause 1: The machine is out of paper or paper is not correctly loaded in the paper tray.
Cause 2: The Jam Clear Cover is not closed correctly.
Cause 3: Paper dust has accumulated on the surface of the paper pick-up rollers.
Cause 1: The machine is out of paper or paper is not correctly loaded in the paper tray.
Do one of the following:
- Refill the paper tray, and then press the Right arrow key.
- Remove and reload the paper, and then press the Right arrow key.
To load paper in the paper tray, see the Related FAQs at the end of the page.
Cause 2: The Jam Clear Cover is not closed correctly.
Make sure the Jam Clear Cover is closed evenly at both ends.
Cause 3: Paper dust has accumulated on the surface of the paper pick-up rollers.
Clean the paper pick-up rollers.
> Click here to see how to clean the paper pick-up rollers.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質
