HL-4050CDN

常見問題&故障排除

Clear white lines or ribbing down the page on 2-sided(duplex) print.

Please check the following points:

1: Choose Thin Paper mode in the printer driver and re-send the print job.

If the problem is not solved after printing a few pages, follow these steps:

Open the back cover.
Pull down the two grey levers, one on the left-hand side and one on the right-hand side, to position B as shown in the illustration below.

Position B is only for 2-sided(duplex) printing with recycled paper when the temperature and humidity are low.

Close the back cover.
Choose Plain Paper mode in the printer driver and re-send the print job.
If the problem is not solved after printing a few pages, choose Thin Paper mode in the printer driver and re-send the print job.

When you have finished printing, open the back cover and reset the two grey levers back to the original position.

2: Use thicker paper than you are now using.

請於下方回饋您的意見以幫助我們提升服務的品質