Model discontinued. This page is no longer updated.

MFC-5440CN

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I set up an answering machine (TAD) to work on the same line as my FAX/MFC?

The following steps pertain to physical telephone answering devices (TADs) only. If a voice mail Service is used in lieu of a physical TAD, you may experience problems receiving faxes and voice messages. Voice mail service cannot successfully share a telephone line with the FAX/MFC, as either the voice mail or the FAX/MFC will always take control of the call, depending on which one answers first. To set up a TAD to share the telephone line with your FAX/MFC, please follow these instructions:

 


Physically connecting the TAD to the FAX/MFC:

  1. Connect a telephone cord from the jack labeled LINE on the FAX/MFC directly to the telephone jack in the wall.

  2. Connect another telephone cord from the jack labeled Telephone Line on the answering machine to the jack (labeled EXT on the FAX/MFC for USA).

Putting the FAX/MFC in External TAD Mode:

  1. If it is not illuminated in green, press the FAX key.

  2. Press the Menu/Set key.

  3. Press the up or down navigation key until Initial Setup appears and press Menu/Set.

  4. Press the up or down navigation key until Receive Mode appears and press Menu/Set.

  5. Use the up or down navigation key to select External TAD.

  6. Press Menu/Set to confirm your choice.

  7. Press the Stop/Exit key to exit the menu. To the right of the date and time, the LCD will display "TAD", indicating that the FAX/MFC is in External TAD mode.

How External TAD mode works:

When someone dials your telephone/fax number (to send a fax or to speak to you), every telephone sharing the line (including the FAX/MFC) will ring according to the number of rings you set on the TAD. If you do not answer the call, the TAD will answer. As your outgoing message is playing, the FAX/MFC is in the background, silently listening for fax tones. If the FAX/MFC hears fax tones, it will automatically respond and receive the incoming fax. If the FAX/MFC does not hear fax tones, it remains silent, allowing the caller to leave a message.

Setting the number of rings and the outgoing message:

It is recommended that you set the number of rings on the TAD to 2 or 3. The maximum number of rings allowed is 4, but 4 rings is not recommended. When faxes are being sent, fax tones are transmitted for approximately 35 seconds. If it takes the TAD too long to answer, the transmitting fax machine may disconnect before your FAX/MFC answers the call. We also recommend the TAD's outgoing message be a maximum of 20 seconds with a 5-second pause before the message starts. You should also end your message by giving your Fax Receive Code for people sending manual faxes. For example, "After the beep, leave a message or to send a fax press *51 then the Start button". When they press *51, it will create a fax signal for their machine to send.

We recommend beginning your outgoing message with 5 seconds of silence because the FAX/MFC cannot detect over a loud or resonant voice. You can try omitting this pause, but if your machine has trouble receiving, we recommend that you re-record your outgoing message with the pause included.

 

Easy Receive:

All Brother fax machines are preprogrammed in the factory with an Easy Receive feature set to "ON". When you use this feature, you don't have to press the Black(Mono) Start key, the Color(Colour) Start key, or the Fax Receive Code * 5 1(*91 for New Zealand), when you answer a fax call. Wait for the fax machine to answer the call ("RECEIVING" will appear on the LCD if you are at the unit or you will hear fax tones if you answer on an extension phone) and then hang up the handset. The FAX/MFC will do the rest.

 

*To set the Easy Receive:

  1. If it is not illuminated in green, press the FAX key.

  2. Press the Menu/Set key.

  3. Press the up or down navigation key until Fax appears and press Menu/Set.

  4. Press the up or down navigation key until Setup Receive appears and press Menu/Set.

  5. Press the up or down navigation key until Easy Receive or Fax Detect appears and press Menu/Set.

  6. Use the up or down navigation key to select ON.

  7. Press the Menu/Set key to confirm your choice.

  8. Press the Stop/Exit key to exit the menu.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-210C, MFC-3240C, MFC-5440CN, MFC-9420CN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.