HL-1240
 |
常見問題&故障排除 |
Why are all the lights blinking then the drum light blinking?
It indicates Fuser Malfunction.When any of the following error is indicated, turn the printer Off, wait 5 seconds and then turn the printer On again.
If the alarm continues, perform a Factory Reset:
-
Turn the printer off.
-
Hold in the circular button on the front panel of the printer.
-
Turn the printer back on.
-
When the DRUM light is lit by itself let go of the button.
-
Hold in the circular button on the front panel again.
-
Once the Alarm light comes on, let go of the button.
-
This has performed a factory reset on the printer.
If this does not clear the problem, consult your dealer or our authorized service representative.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質
