MFC-9120CN

常見問題&故障排除

常見問題&故障排除

Reduce the size of a received fax to fit the size of the paper in the Brother machine


  • Turning on Auto Reduction will automatically reduce the size of an incoming fax to fit the size of the paper in your machine. To set Auto Reduction mode ON, follow the instructions listed below:
  1. If the FAX mode key  is not illuminated, press it.
  2. Press Menu.
  3. Press the up or down arrow key to select Fax and press OK.
  4. Press the up or down arrow key to select Setup Receive and press OK.
  5. Press the up or down arrow key to select Auto Reduction and press OK.
  6. Press the up or down arrow key to choose ON (or OFF) and press OK.
  7. Press Stop/Exit.
  • The machine calculates the reduction ratio by using the page size of the fax and the Paper Size setting.
    Verify the Paper Size is set correctly by follow the instructions listed below:
  1. Press Menu.
  2. Press the up or down arrow key to select General Setup and press OK.
  3. Press the up or down arrow key to select Paper and press OK.
  4. Press the up or down arrow key to select Paper Size and press OK.
  5. Press the up or down arrow key to choose the correct size and press OK.
  6. Press Stop/Exit.

你已經查看過使用說明書了嗎?

如果您需要進一步的協助, 請聯絡Brother客戶服務:

內容意見回饋

請於下方回饋您的意見以幫助我們提升服務的品質

步驟一: 此頁面的資訊對您有幫助嗎

步驟二: 你有任何其他想要提出的意見嗎?

請注意, 此表格僅用做意見回饋使用