DCP-T720DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 28.10.2020
  • ID: faq00000105_525

Reset the Network Settings to Factory Default

You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
image

  • This feature restores all wired (supported models only) and wireless network settings to the factory settings.

  • You can also reset the print server to its factory settings using Web Based Management.

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

  1. Press Menu.
  2. Press image or image to select the following:
    1. Select [Initial Setup]. Press OK.
    2. Select [Reset]. Press OK.
    3. Select [Network Reset]. Press OK.
  3. Press image for [Reset] to confirm.
  4. Press image for [Yes] to reboot the machine.
    The machine restarts.

MFC-T920DW/MFC-T925DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [Network]. Press OK.
    2. Select [Network Reset]. Press OK.
  3. Press image for two seconds to confirm.
    The machine restarts.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T520W, DCP-T720DW, DCP-T820DW, MFC-T920DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit