HL-1670N
![]() |
FAQs & Troubleshooting |
Print on envelopes.
Do not use any of the following types of envelopes, as they will cause paper feed problems:
- Envelopes that are damaged, curled, wrinkled, or irregularly shaped
- Envelopes that are extremely shiny or highly textured
- Envelopes with clasps, snaps or tie strings
- Envelopes with self-adhesive closures
- Envelopes of baggy construction
- Envelopes that are not sharply creased
- Embossed envelopes
- Envelopes that were previously printed by a laser printer
- Envelopes that are pre-printed on the inside
- Envelopes that cannot be arranged uniformly when placed in a pile
- Envelopes constructed with paper that exceeds the paper weight specifications for the printer
- Poorly manufactured envelopes with edges that are not straight or consistently square
- Envelopes with transparent windows, holes, cutouts or perforations.
Before printing envelopes, you must fan the stack of envelopes well to avoid paper jams and misfeeds.
![](/g/b/img/faqend/faq00000063_019/hk/en/6285/126b.gif)
- Do not load different types of paper at the same time in the paper cassette because paper jams and misfeeds may occur.
- Do not print on envelopes using 2-Sided(Duplex) printing.
- For correct printing, you must select the same paper size from within your software application as the paper in the tray.
- If your application software does not support paper size selection in its print menu, you can change the paper size on the printer's control panel under the PAPER menu.
-
Open the Multi-purpose tray
-
Unfold the Multi-purpose tray extension.
-
Open the Face up output tray.
-
Place envelopes in the Multi-purpose tray so they touch the back of the tray and remain below the limit mark.
- If you are printing on paper that weighs more than 135 gsm (36 lbs), use the face up output tray.
- Insert the leading edge of the paper first and push it gently into the tray.
- The top of the paper stack must be under the guides that are on both sides of the tray. The maximum thickness is 11 mm (0.43 inch).
- The printed side must be face up.
-
Press and slide the paper width adjuster to fit the envelope size.
- Make sure that neatly stacked envelopes are correctly seated in the Multi-purpose Tray; otherwise, envelopes may not be fed correctly, resulting in skewed printouts or paper jams.
- When printing, the inside tray automatically rises to feed envelopes into the printer.
-
Change the following settings in the printer driver properties tab.
PCL Driver
![](/g/b/img/faqend/faq00000063_019/hk/en/6632/4.gif)
PS Driver
![](/g/b/img/faqend/faq00000063_019/hk/en/6633/com_MP1.gif)