DCP-L2520D
 |
FAQs & Troubleshooting |
Black lines down the page
Please check the following points to solve the problem:
-
(For models with Automatic Document Feeder only)
Wipe the scanner glass strip with a dry lint free soft cloth.
-
Clean the primary corona wire inside the drum unit by sliding the green tab.
Please refer to the instructions, "Clean the corona wire of the drum unit.".
-
Make sure the green tab of the primary corona wire is at the home position (
).
-
The drum unit may be damaged. Put in a new drum unit.
Please refer to the instructions, "REPLACE DRUM".
-
The toner cartridge may be damaged. Put in a new toner cartridge.
Please refer to the instructions, "REPLACE TONER".
-
The fuser unit may be contaminated. Call your dealer or Brother Customer Service.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
DCP-L2520D, DCP-L2540DW, DCP-L2550DW, HL-2130, HL-2240D, HL-2250DN, HL-2270DW, HL-L2320D, HL-L2360DN, HL-L2365DW, HL-L2375DW, HL-L2385DW, HL-L5000D, HL-L5100DN, HL-L6200DW, HL-L6400DW, MFC-L2700D, MFC-L2700DW, MFC-L2715DW, MFC-L2740DW, MFC-L2750DW, MFC-L5700DN, MFC-L5900DW, MFC-L6900DW
Content Feedback
To help us improve our support, please provide your feedback below.
