VC-500W

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 22/10/2018
  • ID: faqp00100339_000

I cannot print and get an error message "No cassette is installed" or "NO MEDIA".

If you cannot print and an error message is displayed on the computer, check the following.

 

When the cassette button's LED is off or all three LEDs on the Swipe-To-Cut panel are lit:

If the roll cassette is installed and the cassette button's LED is off or all three LEDs on the Swipe-To-Cut panel are lit, the printer may not detect the roll cassette correctly.

Remove the roll cassette, reload it correctly, and then confirm that the cassette button's LED blinks first and then remains lit.

To learn how to install the roll cassette, see "How do I load/change the roll cassette?"

 

When all three LEDs on the Swipe-To-Cut panel are blinking:

The paper printed earlier may be left or jammed in the print output slot. Remove the jammed paper.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

VC-500W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit