Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
http://192.168.1.2
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brn[your machine's MAC Address / Ethernet Address]
The NetBIOS name can be found on the Network Configuration Report.
For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
Type a password if you have set one, and then click .
Click the Network tab.
Click Protocol in the left navigation bar.
In the POP3/IMAP4/SMTP field, click Advanced Settings and make sure the status of POP3/IMAP4/SMTP is Enabled.
Configure the POP3/IMAP4/SMTP settings.
Confirm that the email settings are correct after configuration by sending a test email.
If you do not know the POP3/IMAP4/SMTP server settings, contact your network administrator or Internet Service Provider (ISP).
When finished, click Submit.
The Test Send/Receive E-mail Configuration dialogue box appears.
Follow the instructions in the dialogue box to test the current settings.
.
