MFC-J6935DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Load Paper in the Multi-purpose Tray (MP Tray)

Use the MP Tray for special print media, such as photo paper or envelopes.
  • If the [Check Paper] setting is set to [On] and you set the paper in MP tray, a message appears on the LCD asking if you want to change the paper type and paper size. Change the Paper Size and Paper Type settings if needed, following the LCD instructions.
  • Load only one size and type of paper in the paper tray at a time.
  • When you load a different paper size in the tray, you must change the Paper Size setting in the machine or the paper size setting on your computer.

    Doing this enables the machine to automatically feed paper from the appropriate tray if Auto Tray Select has been set in the machine or printer driver.

  1. Open the MP tray.

    When you want to load paper larger than A4 or Letter size paper, pull up the paper tray using both hands until it locks into place.

  2. Gently press and slide the MP tray paper guides to match the width of the paper you are using.
  3. Fan the stack of paper well to avoid paper jams and misfeeds.
    Always make sure the paper is not curled or wrinkled.
  4. Gently load the paper in the MP tray with the printing surface face up.
    • Using A4, Letter, or Executive
      Landscape orientation
    • Using A3, Ledger, Legal, Folio, Mexico Legal, India Legal, A5, A6, envelopes, Photo, Photo L, Photo 2L, or Index Card
      Portrait orientation

    When using envelopes, load the envelopes with the printing surface face up and the flap on the left as shown in the illustration.

    See Related Information: About Envelopes.

    If you are having difficulty loading paper in the MP tray, push the release lever (1) towards the back of the machine, and then load the paper.

  5. Using both hands, gently adjust the MP tray paper guides to fit the paper.
    • DO NOT press the paper guides too tightly against the paper. Doing this may cause the paper to fold and jam.
    • Place the paper in the centre of the MP tray between the paper guides. If the paper is not centred, pull it out and insert it again at the centre position.
  6. Do one of the following:
    • When using A4 or Letter size, or smaller size paper

      Pull out the paper support until it locks into place.

    • When using paper larger than A4 or Letter size, or envelopes

      Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).

  7. Change the paper size setting in the machine's menu, if needed.

    Make sure printing has finished before you close the MP tray.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J6930DW, MFC-J6935DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.