MFC-J6520DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 15/10/2019
  • ID: faq00002192_010

My documents are sent to a different machine (the IP address is not unique and "IP Config" changes from "Auto" to "Static")

Set the BOOT method to "Auto" and disable the APIPA protocol:

 

  1. Press Settings(Settings).
     
  2. Press All Settings.
     
  3. Press the Up or Down arrow to display Network, and then press it. (This step might be skipped in some models.)
     
  4. Press the Up or Down arrow to display WLAN, and then press it. (This step might be skipped in some models.)
     
  5. Press the Up or Down arrow to display TCP/IP, and then press it. (This step might be skipped in some models.)
     
  6. Press the Up or Down arrow to display BOOT Method, and then press it. (This step might be skipped in some models.)
     
  7. Press the Up or Down arrow to display Auto, and then press it. (This step might be skipped in some models.)
     
  8. Press Auto.
     
  9. Press the Up or Down arrow to display APIPA. Press APIPA.
     
  10. Press Off.
     
  11. Press Home(Home).

 

If you still cannot use your machine, restart your wireless network interface.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-9015CDW, DCP-9020CDW, DCP-J552DW, DCP-J562DW, DCP-J752DW, DCP-J785DW, MFC-9330CDW, MFC-9340CDW, MFC-J4510DW, MFC-J4710DW, MFC-J650DW, MFC-J6520DW, MFC-J6720DW, MFC-J680DW, MFC-J6920DW, MFC-J6925DW, MFC-J870DW, MFC-J880DW, MFC-J985DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit