TD-4420DN/4420DN(FC)

FAQs & Troubleshooting

FAQs & Troubleshooting

How to set the Cutter

Movie: How to set the Cutter

*The video clip is being streamed from YouTube.

 

 

> To attach the Cutter:

> To change the Cutting Options (except for TD-4420DN(FC)/4550DNWB(FC)):

 

Attach the Cutter

 

  1. Make sure you disconnect the printer from the AC power outlet.

    disconnect the printer
     
  2. Place the printer upside down.
     
  3. Remove the front cover base using a flathead screwdriver.

  4. Remove the front cover using a flathead screwdriver.

  5. Attach the cutter using a flathead screwdriver.

     
  6. Connect the connector of the cutter to the printer.

  7. Reattach the front cover base using a flathead screwdriver.

 

Change the Cutting Options (except for TD-4420DN(FC)/4550DNWB(FC))

 

After attaching the cutter, set the printer driver cutting options.

 

  1. Turn on the printer.
     
  2. Open the printer preferences menu as follows:

    Windows 11
    Click Start > Settings > Bluetooth & devices > Printers & scanners.
    Click the printer you want to set up, and then click Open print queue > Printer > Printing Preferences....

    Windows 10 / Windows Server 2016 / Windows Server 2019:
    Click Start > Settings > Devices > Printers & scanners.
    Click the printer you want to set up, and then click Open queue > Printer > Printing Preferences.

    Windows 8 / Windows 8.1 / Windows Server 2012 / Windows Server 2012 R2:
    Click Control Panel in the Apps screen. Click Hardware and Sound > Devices and Printers.
    Right-click the printer you want to set up, and then click the Printing preferences menu.

    Windows 7 / Windows Server 2008 / Windows Server 2008 R2:
    Click Start > Devices and Printers. Right-click the printer you want to set up, and then click the Printing preferences menu.
     
  3. Check the Cut Every check box, and then select where to cut when multiple labels are printed.

  4. Check the Cut at End check box.
     
  5. Click OK.

Label Cutting Options

Auto Cut
(Cut every label)

Cut at End Image
Off On
Off Off
On On or Off

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

TD-4210D, TD-4410D, TD-4420DN/4420DN(FC), TD-4520DN, TD-4550DNWB / 4550DNWB(FC)

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.