QL-1050N

FAQs & Troubleshooting

FAQs & Troubleshooting

I cannot print on the 103 mm wide label roll via USB using the latest printer driver.

You may need to update your printer's paper information using the Uptool if the following situations occur:

  • P-touch Editor does not detect the 103 mm wide label roll.
  • The printer's Web Based Management page shows "/" or "102mm/4" in View Configuration > Media Type for Paper Source.
    Web Based Management

To update your printer's paper information:

Make sure that you have installed the latest printer driver and set up the printer correctly using the USB connection.

  1. Download the Uptool (.exe) for your model:
    Language QL-1050/1050N QL-1060N
    English Download Downlaod
    English (UK) Downlaod Downlaod
    Français Download Download
    Deutsch Downlaod Downlaod
    Italiano Downlaod Downlaod
    Nederlands Download Download
    Español Download Download
    Dansk Downlaod Downlaod
    Norsk Download Download
    Português Download Download
    Svenska Download Download
    中文 Download Download

     

  2. Connect the printer to your computer via USB, and then turn the printer on.
  3. Run the downloaded tool (uptool.exe).
  4. Follow the on-screen instructions to update the paper information.
  5. Turn the printer off and then on again.
  6. Confirm that the 103 mm wide paper can be selected in P-touch Editor or is shown on the printer's Web Based Management page.

If you have connected more than one printer to your computer, the printers may be listed in the Devices and Printers window as "Brother [model name] (Copy 1)" and "Brother [model name] (Copy 2)". To run the Uptool for multiple printers, you must delete any unnecessary printer drivers from the Devices and Printers (refer to "How to open the Devices and Printers window").

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

QL-1050, QL-1050N, QL-1060N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.