HL-5170DN

FAQs & Troubleshooting

FAQs & Troubleshooting

All the lights are flashing together.


When all the lights are flashing together, turn the printer power OFF, wait 5 seconds and then turn the printer power ON again.

 

If the error continues, disconnect the interface cable from the back of the printer and use the following steps to reset the printer:

  1. Turn the printer off.
  2. Press and hold the Go button on the front of the printer, at the same time turn the printer power on.
  3. When the Toner light is on by itself, release the Go button.
  4. Push and hold the Go button again, when the Paper light is on by itself, release the Go button.

 

If this does not clear the problem, contact Brother Customer Service.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-5130, HL-5140, HL-5150D, HL-5170DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.