Model discontinued. This page is no longer updated.

HL-3260N

FAQs & Troubleshooting

FAQs & Troubleshooting

The paper is skewed when it's printed.

There are various causes for paper skew.
Please check the following points to avoid the skew:


Set the document correctly (only applicable for Copy or fax)
Please make sure you set the document in the ADF (Automatic Document Feeder) and adjust the paper guides to fit the width of your documents or set the document on the scanner glass without a skew.


Load the paper correctly in the paper tray
Please make sure you load the paper in the paper tray correctly. Adjust the paper guides to fit the width of the paper you are using.

 

Check the paper specification
Please make sure you are using the paper which meets the required specification. For details, please refer to the User's Guide. The latest User's Guide is available in the Manuals section.

 

Check the paper size setting in the printer driver
Please make sure the correct paper size is selected in the printer driver to match the paper you are using.


NOTE:The steps may differ depending on the operating system being used.

  1. Open Printing Preferences. (Click here to see the details of how to open the Printing Preferences.)
  2. Click the Basic tab and check the Paper Size setting.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-8040, DCP-8045D, DCP-9010CN, FAX-8070P, HL-1650, HL-1670N, HL-2460, HL-2600CN, HL-2700CN, HL-3040CN, HL-3070CW, HL-3260N, HL-3450CN, HL-4000CN, HL-4040CN, HL-4050CDN, HL-4070CDW, HL-4200CN, HL-5130, HL-5140, HL-5150D, HL-5170DN, HL-6050DN, HL-7050N, HL-8050N, MFC-8220, MFC-8440, MFC-8840D, MFC-8840DN, MFC-9030, MFC-9070, MFC-9120CN, MFC-9160, MFC-9180, MFC-9320CW, MFC-9420CN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.