Model discontinued. This page is no longer updated.

HL-1430

FAQs & Troubleshooting

FAQs & Troubleshooting

White spots on black text and graphics or black spots appear at 94 mm (3.7 in.) intervals.


 

If the problem is not solved after printing a few pages, the drum unit may have glue from label stock on the OPC drum surface.

 

Clean the drum unit as follows:

 

  1. Position the print sample in front of the drum unit, and find the exact position of the poor print.

     

     

  2.  

    Turn the drum unit gear by hand while looking at the surface of the OPC drum.

     

  3.  

    When you have located the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a cotton swab until the dust or paper powder on the surface comes off.

     

 

Do not clean the surface of the photosensitive drum with a sharp object, such as a ball-point pen, etc.

If the problem still occurs even after you have cleaned the drum unit, the drum unit may be damaged. Put in a new drum unit. To see how to replace the drum unit, click here.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-1430

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.