HL-1212W

FAQs & Troubleshooting

FAQs & Troubleshooting

Replace Toner

The Replace Toner message appears when the toner cartridge needs to be replaced. When the Replace Toner message appears, the following LED indications are shown on the control panel.

 

ContinueMode StopMode

 

To clear the Replace Toner message:


 

  1. Open the cover and take out the drum unit assembly.
     
    take_outdrum
  2. Replace the toner cartridge.
     
    toner_drum
  3. Slide the green tab on the drum unit from side to side 3 times. Be sure to return the tab to the home position (1).
     
    coronawire
  4. Put the drum unit assembly back into the machine and close the cover.
     
    cover_close

     

    If you install a new genuine Brother toner cartridge but the Replace Toner error indication remains, the drum unit and toner cartridge assembly is not installed correctly. Take the drum unit and toner cartridge assembly out of the machine and put it back in.

     

If the error message still continues to appear, click here to see resolve the issue.

 

Brother strongly recommends you DO NOT refill the toner cartridge provided with your machine. We also strongly recommend you continue to use only Brother Original replacement toner cartridges. Use or attempted use of third-party toner and/or cartridges in the Brother machine may cause damage to the machine and/or may result in unsatisfactory print quality. Our limited warranty coverage does not apply to any problem that is caused by the use of third party toner and/or cartridges. To protect your investment and obtain premium performance from the Brother machine, we strongly recommend the use of Brother Original Supplies.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-1110, HL-1112, HL-1210W, HL-1212W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.