2104DAV

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 08/02/2007
  • ID: faqh00000519_000

My machine skips stitches

  1. The needle is bent, or the tip is blunt.
    Replace with new needle.

  2. The needle is incorrectly installed.
    Install the needle correctly.

  3. The wrong needle is being used.
    Use the correct needle. Schmetz 130/705H - suggested.

  4. The machine is threaded incorrectly.
    Thread correctly.

  5. The presser foot pressure is too loose.
    Turn the pressure adjustment screw clockwise to increase the presser foot pressure.

  6. The thread tensions are not adjusted properly.
    Adjust the thread tension.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

1034D, 1034DX, 2104DAV, 3034D, 3034DWT, 734D, 734Ds, 929D, M343D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit