FAX-2940

FAQs & Troubleshooting

FAQs & Troubleshooting

Wrinkles or creases

Print Quality Problem - Wrinkles or creases

 

Please check the following points to solve the problem:

  • Make sure that the paper is loaded properly.

    • The paper is below the maximum paper mark (1). Over filling the paper tray will cause paper jams.
      maximum paper mark
    • The side to be printed on must be face down.
    • The paper guides touch the sides of the paper so it will feed properly. If the guides are too tight or too loose against the paper stack, slide the paper guides to fit the paper size.
      the paper guides

     


  • Check the paper type and quality.
    Please refer to FAQs, "What kind of paper can I use?" and "What is the recommended paper?"

  • Turn over the stack of paper in the tray or try rotating the paper 180 degree in the paper tray.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7055, DCP-7055W, DCP-7060D, DCP-7065DN, DCP-7070DW, DCP-8110DN, DCP-8250DN, FAX-2840, FAX-2940, HL-5440D, HL-5450DN, HL-5450DNT, HL-5470DW, HL-6180DW, HL-6180DWT, MFC-7360N, MFC-7460DN, MFC-7860DW, MFC-8510DN, MFC-8520DN, MFC-8950DW, MFC-8950DWT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.