DCP-9055CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

Jam Tray 1 / Jam Tray 2

The LCD names for the paper trays are as follows.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
 

 Tray type  Tray name
 Standard paper tray  TRAY 1
 Optional lower tray  TRAY 2

 

If the LCD shows Jam Tray 1 or Jam Tray 2, follow these steps:

  1. Pull the paper tray completely out of the machine.

    Jam Tray 1:

     

    Image



    Jam Tray 2:
     

    Image


     

    DO NOT touch the shaded parts shown in the illustration. These rollers may be rotating at high speed and can pinch or entrap your hand.
     

    Image

     

  2. Use both hands to slowly pull out the jammed paper.
     

    Image

     

     

    If the paper cannot be removed easily in this direction, stop pulling it and follow the instructions in the Related FAQ's: "Jam Inside".

     

    Pulling out the jammed paper downwards allows you to remove the paper easier.


     
  3. Make sure the paper is below the maximum paper mark Image (1) of the paper tray. While pressing the green paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.
     

    Image

  4. Put the paper tray firmly back in the machine.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-9055CDN, DCP-9270CDN, MFC-9460CDN, MFC-9465CDN, MFC-9970CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.