PT-D800W

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 26/04/2016
  • ID: faqp00100269_000

How to use Auto Power-Off Time

You can specify the auto power-off time in 2 ways.
Also, you can specify the setting for each case of using the AC adapter and using the Li-ion battery.

 

Using the Printer Setting Tool (For all models)

For Windows:
Use the Device Settings in the Printer Setting Tool on your computer.
For information on starting the Printer Setting Tool, see “Using the Printer Setting Tool”.
For information on using the Device Settings, see “Using the Device settings”.

 

For Mac OS X (D800W / E800W only):
Use the Printer Setting Tool on your computer.
For information on using the Printer Setting Tool, see “Using the Printer Setting Tool (for Mac)”.

 

Using your printer’s keyboard (For models equipped with the keyboard)

  1. Select [Settings] in the Home screen using the Up arrow , Down arrow , Left arrow or Right arrow key, and then press the OK or Enter key.

     

  2. Select [Auto Power Off] using the Up arrow or Down arrow key, and then press the OK or Enter key.

     

  3. Select [AC Adapter] or [Li-ion Battery] using the Up arrow or Down arrow key and set the value using the Left arrow or Right arrow key.

     

  4. Press the OK key.

 

Available settings:

Setting Value Setting Value
AC Adapter Off (None) Li-ion Battery Off (None)
10 min 10 min
20 min 20 min
30 min 30 min
40 min 40 min
50 min 50 min
1 h 1 h
2 h  
4 h
8 h
12 h

 

  • If you connect the AC adapter to the printer after you specified "Auto Power Off", the machine uses the "AC Adapter" setting.
  • The default value is "1 h" for the AC adapter and "30 min" for the Li-ion battery.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-D800W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit