ADS-2700W
FAQs & Troubleshooting
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface.
A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.
Press (Settings) .
Press Network .
Press Wired LAN or WLAN .
Press the Up or Down arrow to display Wired Enable or WLAN Enable .
Press Wired Enable or WLAN Enable .
Press On (or Off ).
If your Brother machine is still having an issue over the network, see the Related FAQs at the end of the page.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models ADS-2700W, ADS-2800W, ADS-3600W
Content Feedback
To help us improve our support, please provide your feedback below.
Error Messages Paper Feed / Paper Jam Scan Mobile Advanced Functions (for Administrators) Linux Product Setup Driver / Software Network Settings Consumables / Paper / Accessories Cleaning Specification
Settings/Management Function Control Security Enhancement Scanner / Scan Key Tool Error Message on Machine's Display Paper Jam Paper Loading / Handling Cannot Scan (via Network) Cannot Scan (via USB / Parallel) Scan Quality Problem General Scan Problem Scan from Machine Scan from Mobile Device Scan from Computer (Windows) Scan Settings / Management Tips for Scanning Advanced Networking Wired Network Setting Problem Wireless Network Setting Problem Wired Network Settings Wireless Network Settings Tips for Network Settings Brother iPrint&Scan / Mobile Connect (iOS) Brother iPrint&Scan / Mobile Connect (Android™) Brother iPrint&Scan (Windows Phone Device) Machine Setup / Settings Paper Handling Installing Drivers / Software Updating Drivers / Software / Firmware Uninstalling Drivers / Software Driver / Software tips Consumables Cleaning Product Specification
(Settings).
