ADS-2600W

FAQs & Troubleshooting

FAQs & Troubleshooting

I cannot scan from my computer via network. (For Windows)

The most common reason a networked Brother machine may stop scanning, is because the connection between the computer and the Brother machine is lost.

For troubleshooting purposes, ensure you are logged in with admin rights. Disable any firewall programs that are running. Once you are able to scan, enable your firewall again. If the firewall blocks network communication, we recommend allowing the following Internal/External ports through your firewall:

 

  • UDP: 54925
  • UDP: 137
  • UDP: 161

If your computer is running any Virtual Private Network (VPN) software, disable it before you continue troubleshooting.

Follow the steps below to resolve the issue:

NOTE: Illustrations shown below are from a representative product and operating system, and may differ from your Brother machine and operating system.

 

PART 1: VERIFY THE BROTHER MACHINE IS POWERED ON AND THERE ARE NO ERRORS

  1. If the machine's display (hereinafter called LCD) is blank or the Power Indicator (with LED) is off, then the Brother machine is not powered on or is in sleep mode. Press a button on the machine to see if it wakes from sleep mode. If it does not, turn the machine off and then on by unplugging the machine from the AC power outlet (electrical socket) and then plugging the machine in again.

    If you are unable to power on the machine, then this solution does not apply. Troubleshoot the hardware issue.

  2. Check if the LCD display or LED indication of your Brother machine is showing an error. If an error is displayed, go to the Troubleshooting section and find a solution.

 

PART 2: VERIFY THE CONNECTION

Verify the Brother machine is connected to your network.
> Click here to see how to verify the Brother machine is connected to your network.

 

 

PART 3: CONFIGURE SCANNER SETTINGS

  1. Open Scanner Properties. (Click here to see how to open Scanner Properties.)
  2. Click the Network Setting tab.
  3. Click the Browse button.

    Network Setting tab

     

    • If you find the machine successfully, make note of the IP address and make sure the IP address matches the address of your Brother machine. Choose your machine and click OK.
      You can obtain the machine's IP address using the control panel.
      > Click here to see how to check your machine's IP address.
      Search for Devices

       

    • If you cannot find the machine successfully, then there is no communication between the devices over the network. This may be caused by a firewall or other security program blocking communication. Try to eliminate as many of these applications and try browsing again.
  4. Change the setting to Specify your machine by address. The IP Address should match the machine's IP address found in the previous step or you can manually specify the machine's IP address.
     
  5. Click OK.

    Change the setting to "Specify your machine by address"

     

  6. Open your scanning applications and try scanning.

     

    • If you are able to scan from your Brother machine, then the issue is resolved.
       
    • If you are still unable to scan, continue to PART 4.

 

PART 4: UNINSTALL AND REINSTALL THE BROTHER DRIVERS

  1. Uninstall and reinstall the Brother drivers.

    For Windows XP SP2 or greater or Windows Vista Users: If a firewall is detected, choose Change the Firewall port settings to enable network connection and continue with the installation (Recommended). You may have to click NEXT to continue.

    If you are using a firewall other than the Windows Firewall or the Windows Firewall is off, you may receive a message warning you that the firewall could block network communication. See the instructions provided with your firewall software for information on how to allow the following network ports:

     

    • For network scanning, allow UDP port 54925.
       
    • If you still have trouble with your network connection, allow UDP ports 137 and 161.
  2. Attempt to scan again to determine if the issue has been resolved. If you are still unable to scan:

     

    • Verify that there are no security applications or firewalls running on the computer that could prevent network communication.
       
    • Attempt to scan from another network-connected computer.
    These steps will help you determine if the issue is specific to this computer. If you can scan from other computers, then contact your computer manufacturer or network administrator for assistance troubleshooting this specific computer.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

ADS-2600W, ADS-2600We

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.