RJ-3055WB

FAQs & Troubleshooting

FAQs & Troubleshooting

How to install the Roll Spacer Set (Optional)

  • To use media with customised width, install the required number of Roll Spacers in the Media Compartment.
  • Available widths: 25.4 mm (1"), 38.1 mm (1.5"), 50.8 mm (2"), 63.5 mm (2.5") (For RJ-3035B / RJ-3055WB only)

> For RJ-2035B / RJ-2055WB (PA-RS-001)
> For RJ-3035B / RJ-3055WB (PA-RS-002)
 

< RJ-2035B / RJ-2055WB >

 

Movie: How to install the Roll Spacer Set (Optional)

*The video clip is being streamed from YouTube.

 

  1. Make sure that the printer is turned off.

  2. Press the Media Compartment Cover Release Tab and lift the Media Compartment Cover.
    Open cover

  3. Insert the Roll Spacers into the Spindle Slots (1) on both sides of the Media Compartment as below.
    Insert the Roll Spacers into Spindle Slots 1. Spindle Slot
    • The media width can be changed from 25.4 mm (1"), 38.1 mm (1.5") to 50.8 mm (2") by attaching or detaching both sides of the Roll Spacers.
      Confirm what size of the media will be installed before attaching the Roll Spacers.
    • Install the same number of Roll Spacers on each side.
    Insert the Roll Spacers into Spindle Slots 1.  25.4 mm (1") width
    2.  38.1 mm (1.5") width
    3.  50.8 mm (2") width

  4. Gently press down on both sides of the Media Compartment Cover, and make sure it is securely closed.
    Close cover

    When the Media Compartment Cover is closed correctly, it locks into place and the printer automatically feeds a small amount of the media.

 

 

< RJ-3035B / RJ-3055WB >

 

Movie: How to install the Roll Spacer Set (Optional)

*The video clip is being streamed from YouTube.

 

  1. Make sure that the printer is turned off.

  2. Press the Media Compartment Cover Release Tab and lift the Media Compartment Cover.
    Open cover
  3. Insert the Roll Spacers into the Spindle Slots (1) on both sides of the Media Compartment as below.
    Insert the Roll Spacers into Spindle Slots 1. Spindle Slot
    • The media width can be changed from 25.4 mm (1"), 38.1 mm (1.5"), 50.8 mm (2") to 63.5 mm (2.5") by attaching or detaching both sides of the Roll Spacers.
      Confirm what size of the media will be installed before attaching the Roll Spacers.
    • Install the same number of Roll Spacers on each side.
    Insert the Roll Spacers into Spindle Slots

    1.  25.4 mm (1") width
    2.  38.1 mm (1.5") width
    3.  50.8 mm (2") width

    4.  63.5 mm (2.5") width


  4. Gently press down on both sides of the Media Compartment Cover, and make sure it is securely closed.
    Close cover

    When the Media Compartment Cover is closed correctly, it locks into place and the printer automatically feeds a small amount of the media.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

RJ-2035B, RJ-2055WB, RJ-3035B, RJ-3055WB

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.