TD-4650TNWB
 |
FAQs & Troubleshooting |
How to reset the printer settings by directly operating the printer
Printer initialisation clears the printer's DRAM and restores its factory settings.
-
Turn off the printer.
-
Press and hold the Feed/Pause button, and then turn on the printer.
-
Release the button after the LED flashes in amber five times and lights in green/red (blinks 5 times alternately).
The LED colour will change as follows:
Amber (lit) > Red/Amber (blinks 5 times alternately) > Amber (5 times) > Green/Red (blinks 5 times alternately) (Release the button here) > Green (5 times) > Red (5 times) > Green (lit)
After the initialisation, the following factory settings will be restored:
| Parameter |
Default setting |
| Speed |
76 mm/sec (3 ips) |
| Density |
8 |
| Label Width |
101.5 mm (4") |
| Label Height |
101.5 mm (4") |
| Sensor Type |
Gap sensor |
| Gap Setting |
3 mm (0.12") |
| Print Direction |
0 |
| Reference Point |
0,0 (upper left corner) |
| Offset |
0 |
| Tear Mode |
On |
| Label Peeler off Mode |
Off |
| Cutter Mode |
Off |
| Code Page |
850 |
| Country Code |
001 |
| Clear Flash Memory |
No |
< Printer initialisation from the LCD >
You can also activate printer initialisation from the LCD.
-
In the LCD, select the Menu icon
.
-
In the Main menu, select Advanced.
-
Select Initialization.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR
Content Feedback
To help us improve our support, please provide your feedback below.
