TD-4750TNWBR

FAQs & Troubleshooting

FAQs & Troubleshooting

How to load the Ribbon

Movie: How to load the Ribbon

*The video clip is being streamed from YouTube.

 

 

  1. Press the tabs on both sides of the printer, and then lift the Roll Compartment Cover.
    Open Cover

  2. Use one of the following paper cores:
     
    • For 25.4 mm (1") and 12.7 mm (0.5") paper cores with notches, you do not need to install the ribbon spindles.
      Paper cores with notches

    • For 25.4 mm (1") paper core without notches, insert the ribbon spindles into the paper core and ribbon.
      Paper cores without notches

    Follow these directions when installing the ribbon spindle.

    Ribbon spindle


  3. Insert the right side of the Ribbon Rewind Spindle (marked "R") into the Ribbon Rewind Hub. Then, insert the left side of the Ribbon Rewind Spindle into the hole on the left side of the Ribbon Rewind Hub. (a.)
    Insert the right side of the Ribbon Supply Spindle (marked "R") into the Ribbon Supply Hub. Then, insert the left side of the Ribbon Supply Spindle into the hole on the left side of the Ribbon Supply Hub. (b.)
    Insert Ribbon spindles

  4. Thread the ribbon through the Print Head and adhere the leader of the ribbon onto the Ribbon Rewind Paper Core.
    Tread ribbon

    Do not dispose of the Ribbon Rewind Paper Core when replacing the ribbon roll. This part is necessary for the ribbon roll replacement.

  5. Using the Ribbon Rewind Gear, rotate the Ribbon Rewind Hub until the ribbon plastic leader is thoroughly wound and the black section of the ribbon covers the Print Head.
    Rotate Ribbon Rewind Hub
     
  6. Gently press down on both sides of the Roll Compartment Cover to close it.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.