PT-D800W

FAQs & Troubleshooting

FAQs & Troubleshooting

How to create serialised (Simultaneous) tubes / labels

In the following description, "tube(s)" supposes E800TK and E850TKW.

 

"Simultaneous" creates a series of tubes or labels by incrementing two different numbers at the same time.

 

Example:

Example - simutaneous


Create this type of serialised tubes / labels using the printer's keyboard.

 

  1. Enter the text except the text that you want to serialise.

    Example: Create tubes or labels like the example above. In this case, enter only "1A-0".
    Tube creation screen Label creation screen
    Simultaneous - Tube creation screen 1 Simultaneous - Label creation screen 1

     

  2. Position the cursor where you want to insert the first serialised text (to the right of "0"), and then press the Shift and Serialize keys. Select [Simultaneous] using the  Upward arrowor Downward arrowkey, and then press the OK or Enter key.
    Simultaneous - settings screen

     

  3. For the first serialised text, select [Type], [Format], [From], [To] and [Increased by] using the Upward arrowor Downward arrowkey, set the values using the  Left arrow or Right arrow key, and then press the OK or Enter key.

    You can also set [From], [To] and [Increased by] by typing in the numbers you want.

     

    Example: [Type]: Normal, [Format]: 000-999, [From]: 1, [To]: 4, and [Increased by]: 1

     

    See the following Serialise Settings table (factory settings are shown in bold):

    Attribute value Description
    Type Normal, Octal, Hex, Alphabet Specifies the format of the serialised number from decimal, octal, hexadecimal, and alphabetic.
    Format Normal 000-999, __0-999, 0-999 Specifies how the digits of the serialised numbers are aligned.
    - 000-***: Zeroes are used to align the digits.
    - __0-***: Blank spaces are used to align the digits.
    - 0-***: The digits are not aligned.
    Octal 000-777, __0-777, 0-777
    Hex 000-FFF, __0-FFF, 0-FFF
    Alphabet a-z, A-Z
    From Normal 000-999 Specifies the starting text for the serialised numbers.
    Octal 000-777
    Hex 000-FFF
    Alphabet a-z, A-Z
    To Normal 000-999 Specifies the ending text for the serialised numbers.
    Octal 000-777
    Hex 000-FFF
    Alphabet a-z, A-Z
    Increased by 1-9 Specifies the increment for increasing the serialised numbers.

     

  4. Position the cursor where you want to insert the second serialised text (to the left of "0"), and then press the OK or Enter key.
    Tube creation screen Label creation screen
    Simultaneous - Tube creation screen 2 Simultaneous - Label creation screen 2
  5. For the second serialised text, select [Type], [Format], [From], and [Increased by] using the  Upward arrowor  Downward arrowkey, set the values using the  Left arrow   or  Right arrow key, and then press the OK or Enter key.

    Example: [Type]: Alphabet, [Format]: A-Z, [From]: A, and [Increased by]: 1

    See the Serialise Settings table in step 3.

    Because the serialised number count is the same for the first serialised text and second serialised text, the value for [To] is set automatically.

  6. Press the OK or Enter key to display an image of the tubes or labels on the screen.
    For tubes, the starting text and ending text for the serialised numbers are indicated using marks as shown in the following illustration:

     

    Example:

    Tube creation screen Label creation screen
    Simultaneous - Tube ceation screen 3 Simultaneous - Label creation screen 3
  • For tubes, when you select the serialise mark and then press the Shift and Serialize keys, you can do the setting again. (Not available for labels)
  • For labels, although the printer creates multiple pages of labels after you complete the serialise settings, you can select the pages and print only the pages you want.
  • When you want to print multiple copies of the serialised tubes or labels, you can select [Serialize] or [Copy] for the printing order in [Settings] - [Print Order] in the Home screen.
  • When creating labels with a serialised barcode, select the entered barcode, and then press the Serialize key. (Barcodes cannot be printed on tubes.)
  • To return to the previous step, press the Esc key.
  • Letters and numbers increase as shown below:
    0, 1, 2, 3, ... 999, 0, 1, 2, 3 ...
    A, B, C, D, ... Z, A, B, C, D ...
    a, b, c, d, ... z, a, b, c, d ...

 

Movie: How to create serialised (Simultaneous) tubes / labels

*The video clip is being streamed from YouTube.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-D800W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.