This function allows you to add personality to your ribbons/tapes.

To use the Initial Marks function, follow the steps below.

Example:

1. Press the [Decorative] key (  ).
   [Select Category] is displayed.


2. Press the [Cursor] key (  ) to select [Text].


3. Press the [OK] key (  ).


4. Press the [Cursor] key (  ) to select [Initial mark].


5. Press the [OK] key (  ).
    [Select Design] is displayed.


6. Press the [Cursor] key (  ) until appears.
    
7. Press the [OK] key (  ).
   [Input Text] is displayed.


8. Enter the text you want ().


9. Press the [OK] key (  ).
   [Set Length] is displayed.


10. Press the [Cursor] key (  ) to select [Auto/30-999 mm].


11.  Press the [OK] key (  ).
     [Print] is displayed.

    To preview ribbons/tapes, press the [Preview] key (  ) when [Print] is displayed on the LCD.

12.  Press the [OK] key (  ).
    Press the [Cursor] key (  ) or the number keys to specify the number of copies within the range of 1 - 9.


13.  Press the [OK] key (  ).
     

    • If you set the label length to longer than the default length ([Auto]), the text prints repeatedly within the length you set. If the text length exceeds the label length you have set, the text may not print completely.
       

    • The available label length setting changes depending on the length of your text.
       

    • Press the [Font] key (  ) to select a font after entering your text (for Continuous Frame templates, you can also select the size and style).
       

    • Templates cannot be edited.

    • To exit a template and return to the text entry screen, press the [Escape] key (  ) when [Print] appears on the LCD.
       

    • Ribbon/tape files created using templates cannot be saved.
       

    • When you access templates, your most recent label created with a template opens automatically.
       

    • After pressing the [OK] key (  ), [Please Cut] appears on the LCD for two seconds.