TD-2130N

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I transfer label templates to the printer via network? (BRAdmin Professional)

To transfer templates to the printer via network, you need BRAdmin Professional.
Please download from the [Downloads] page and install it.

The following screens may differ depending on the model.
 

  1. Create the template you want to transfer with P-touch Editor, then choose [File] - [Transfer Template...] menu to register. Transfer Manager will start up.
  2. In Transfer Manager, click button, or choose [File] - [Save Transfer File] menu to save the registered template in .blf format.
     
  3. Start BRAdmin Professional.
    Choose the printer from the list and click on the [Control] menu. Select [Load Firmware (Manual)].
    bradminpro1
     
  4. Choose [TFTP PUT] and click [OK].
    bradminpro2
     
  5. Enter the password and choose the .blf file which you saved in step 2, then click [OK].
     bradminpro3

    The default user ID and login password to manage printer settings is one of the following combinations:

    Combination ID Password
    1 - -
    2 admin access
    3 - initpass
    4 - The password preceded by "Pwd" and located either on the bottom of the printer or in the battery or media compartment.

     

    For more information, see [IMPORTANT – Network Security Notice: Default Login Password Change] on the [Manuals] page.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-9800PCN, PT-D800W, PT-E550W, QL-1060N, QL-1110NWB/1110NWBc, QL-580N, QL-720NW, QL-810W/810Wc, QL-820NWB/820NWBc, RJ-2050, RJ-2140, RJ-2150, RJ-3050, RJ-3150, RJ-4040, RJ-4250WB, TD-2120N, TD-2130N, TD-4100N, TD-4420DN/4420DN(FC), TD-4520DN, TD-4550DNWB / 4550DNWB(FC), TP-M5000N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.