How to charge the rechargeable Li-ion Battery.

The rechargeable Li-ion battery can be charged while it is inserted in the printer and also while it is removed from the printer. Perform the following procedure to charge the rechargeable Li-ion battery.

  • Charge the rechargeable Li-ion battery immediately after purchase using the following procedure.
  • Up to 180 minutes is needed to fully charge a rechargeable Li-ion battery. About 300 pages can be printed when using a new, fully-charged rechargeable Li-ion battery.



Charging while installed in the printer

  1. Make sure that the printer is turned off.

  2. Make sure that the rechargeable Li-ion battery is installed in the printer.

    Li-ion battery
  3. Use the AC adapter and AC power cord to connect the rechargeable Li-ion battery to an AC power outlet, or use the DC cable to connect the battery to a DC power outlet.

    The battery indicator lights in orange.

    When the rechargeable Li-ion battery is fully charged, the battery indicator turns off.

    Li-ion battery 1 POWER indicator
    2 (Li-ion) battery indicator


Charging while removed from the printer

Use the AC adapter and AC power cord to connect the rechargeable Li-ion battery to an AC power outlet, or use the DC cable to connect the battery to a DC power outlet.

The battery indicator lights in orange.

When the rechargeable Li-ion battery is fully charged, the battery indicator turns off.

battery indicator 1 (Li-ion) battery indicator

Stopping rechargeable Li-ion battery charging

To stop rechargeable Li-ion battery charging, disconnect the AC power cord or DC cable from the battery's AC/DC connector.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PJ-622, PJ-623, PJ-662, PJ-663, PJ-673

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.