How do I set tape margins and what features are there?

Follow the steps below:

 

  1. Press the [Menu] key.

     

  2. Press the Cursor key (  ) to select [Margin] and press the Enter key (  ).

     

  3. Press the Cursor key to select the margin you want to set from among [Full], [Half], [Narrow] and [Chain Print].

     

  4. Press the Enter key.

     

<Full / Half / Narrow>

For leaving equal margins on both sides of the text

 

The margin length is as follows.

 

 

<Chain Print>

For creating a label containing text in various styles

 

  1. Enter text.
     
  2. Press the [Print] key (  / ).  [Copies:] appears.
     
  3. Press the Cursor key or enter a number with the number keys to select the number of copies.
     
  4. Press the Enter key. Printing starts, and then the message [OK to Feed?] appears.
     
  5. Press the Backspace key (  /  ).
     
  6. Clear the text, enter new text for the next label, and then press the [Print] key.
     
  7. When the message [OK to Feed?] appears after the last label is printed, press the Enter key.
     
  8. After the tape is fed, press the cutter lever to cut off the chain of labels.
  • When [Half] or [Narrow] is set, the length from the printed dots (:) to the end of the label is displayed.
     
  • To print more than 1 copy of a label with minimum margin, set the margin to [Narrow].
     
  • When [Chain Print] is set, feed the tape before using the cutter otherwise a part of the text may be cut off. Also, cut along the printed dots (:) with scissors so that the text is centred on the label.
    *Feed the tape before using the cutter.
     
  • Do not pull the tape since this may damage the tape cassette.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

GL-H100, GL-H105, PT-E100, PT-H100, PT-H101, PT-H107, PT-H108

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.