PJ-773
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
How to install the rechargeable Li-ion battery (optional)
-
Move battery latch 1 to the unlock position.
-
While holding battery latch 2 in the unlock position, remove the battery cavity mounting block.
![Removing charging terminal protection case Removing charging terminal protection case](/g/b/img/faqend/faqp00001469_005/gb/en/1012943/b040.gif) |
1. Battery latch 1
2. Battery latch 2
3. Battery cavity mounting block |
-
Release battery latch 2.
Battery latch 2 moves back to the lock position.
-
Insert the battery into the battery cavity until it locks into place.
![Inserting rechargeable Li-ion battery Inserting rechargeable Li-ion battery](/g/b/img/faqend/faqp00001469_005/gb/en/1012944/b110.gif) |
4. Battery cavity
5. Rechargeable Li-ion battery |
-
Move battery latch 1 to the lock position.
![Moving battery latch 1 Moving battery latch 1](/g/b/img/faqend/faqp00001469_005/gb/en/1012945/b115.gif)
-
The voltage supplied by the rechargeable Li-ion battery may vary. The printing speed may also vary depending on the voltage.
-
When the battery is being used, the battery cavity mounting block is not needed. Keep it in a safe place to avoid losing it.
Removing the Rechargeable Li-ion Battery
-
Move the battery latches to the unlock position, and then remove the battery.
![Removing rechargeable Li-ion battery Removing rechargeable Li-ion battery](/g/b/img/faqend/faqp00001469_005/gb/en/1012946/b113.gif) |
1. Battery latches |
-
Insert the battery cavity mounting block into the battery cavity until it locks into place.
-
Move battery latch 1 to the lock position.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
PJ-722, PJ-723, PJ-762, PJ-763, PJ-763MFi, PJ-773
Content Feedback
To help us improve our support, please provide your feedback below.