TD-4750TNWB
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
How to clean the Platen Roller
Clean the Platen Roller when replacing the label roll with a new one.
To clean the platen roller, follow the steps below:
-
Turn off the printer.
-
Press the tabs on both sides of the printer, and then lift the Roll Compartment Cover.
![Open cover Open cover](/g/b/img/faqend/faqp00001455_004/gb/en/2356983/cover_open.gif)
-
Rotate the Platen Roller and wipe it thoroughly with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol.
![Wipe Platen Roller Wipe Platen Roller](/g/b/img/faqend/faqp00001455_004/gb/en/2356984/platen.gif)
-
Gently press down on both sides of the Roll Compartment Cover to close it.
![Close cover Close cover](/g/b/img/faqend/faqp00001455_004/gb/en/2356985/cover_close.gif)
Calibrate the Gap/Black Mark Sensor every time you change the media.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR
Content Feedback
To help us improve our support, please provide your feedback below.