TD-2120N

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 09/11/2022
  • ID: faqp00001444_004

How do I reset network setting?

1. POWER indicator
2. (Power) button
3. Media exit
4. RD/Media Roll compartment top cover
5. STATUS indicator
6. (Feed) button
7. (Print) button
8. Cover release lever
  • To reset network settings and turn APIPA ON

     

    1. Press and hold the Power button to turn the printer off.
    2. Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
    3. While holding down the Power button, press the Feed button 2 times.
    4. Release the Power button.
      All network settings will be reset.
  • To reset network settings and turn APIPA OFF

     

    1. Press and hold the Power button to turn the printer off.
    2. Press and hold the Feed button and the Power button, until the POWER indicator lights in orange and the STATUS indicator blinks in green.
    3. While holding down the Power button, press the Feed button 4 times.
    4. Release the Power button.
      All network settings will be reset.

APIPA --- If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.0.1 to 169.254.254.254.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

TD-2120N, TD-2125N, TD-2125NWB, TD-2130N, TD-2135N, TD-2135NWB

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit