QL-1110NWB/1110NWBc

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I clean my printer?

<Print head maintenance>

The DK Roll (thermal printing paper type) used with the printer is designed to clean the print head automatically. When the DK Roll passes the print head during printing and label feeding, the print head is cleaned. If the print head is not cleaned enough, use a cotton swab and wipe the head.

 

<Roller maintenance>

Cut the DK label and peel the backing from the label. Then, place the adhesive side of the label against the roller and remove the dirt.
Roller maintenance

1. Print head
2. Roller


<Exterior of the unit maintenance>

Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly damp cloth if it is difficult to remove marks.

Do not use paint thinner, benzene, alcohol or any other organic solvent.
These may deform or damage the printer case.

 

<Label outlet maintenance>

If a label causes the machine to jam due to adhesive residue attached to the label outlet, disconnect the AC Power Cord from the machine and clean it with a cloth or cotton swab dipped in alcohol.

Outlet maintenanceOutlet maintenance

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

QL-1100/1100c, QL-1110NWB/1110NWBc

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.