QL-720NW
 |
FAQs & Troubleshooting |
Which interface cable can I use?
QL-720NW should be used with the following interfaces.
<for Windows users>
-
USB cable
Use the enclosed interface cable.
-
RS-232C cable
Do not use an interface cable that is longer than 6 feet. (2.0 metres)
-
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.
<for Macintosh users>
-
USB cable
Use the enclosed interface cable.
-
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.
It is not possible to connect RS-232C cable and USB cable to the printer at the same time and use both.
The RS-232C serial connector part of this equipment is not Limited Power Source.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
