PT-2700
|
FAQs & Troubleshooting |
My label is not cut automatically when printing.
-
Check if the "Cut Option" is set to "Chain", "No Cut" or "Manual Cutting".
-
When these options are set to "ON", the tape is not fed and cut after printing the label.
-
Check the Cut Option, or hold down and press to feed and cut the tape.
-
Ensure that "Manual Cutting" is OFF.
Set "Manual Cutting" to OFF and select "Large Margin" or "Small Margin" to cut labels automatically.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.