PT-2030
FAQs & Troubleshooting |
How do I eliminate the margin from the start or end of my label when printing?
Due to the construction of the tape mechanism, the one inch (25mm) piece of tape that is produced prior to every label cannot be eliminated. However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.
The following methods are useful for reducing tape use:
The following methods are useful for reducing tape use:
- Method 1 - Selecting "Narrow" in the Margin setting:
- Press the key.
- Press the arrow key or to select "Margin".
- Press the arrow key or to select "Narrow".
- Press the OK or Enter key.
This eliminates the margin at the end of the tape after printing as shown below:
- Method 2 - Printing several labels at once by using the "Copies" or "Numbering" function:
- Press the key.
- Press the arrow key or to select "Margin".
- Press the arrow key or to select "Narrow".
- Press the OK or Enter key.
- While holding down the key, press the key to display the Copies screen.
- Select "Copies" or "Numbering" using the arrow or key.
- Press the OK or Enter key and select the number of copies to be printed using the arrow or key, or type the number using the number keys.
- Press the OK or Enter key.
This eliminates the margin of the subsequent labels as shown below:
- Method 3 - Printing different labels continuously:
- Press the key.
- Select the "Margin" menu.
- Select "Chain".
- Press the OK or Enter key.
- Enter the text.
- Press the key.
- Repeat step 5 and 6 until all labels have been created.
- After the last label is printed, hold down the key and press the key to finally cut the labels.
An example of the labels:
Content Feedback
To help us improve our support, please provide your feedback below.