Innov-is F410

FAQs & Troubleshooting

Outline of viewing the LCD Screen

When the power is turned on, the LCD comes on, and the following screen is displayed.

The screen is changed using the keys below the LCD.

■Utility stitch screen

■Character/Decorative stitch screen

No.

Display

Item Name

Explanation

(1)

Stitch category

Shows the category of the currently selected stitch pattern.

	: Preset utility stitch
	: Utility stitch
	: Decorative stitch
	: Character stitch (Gothic font)
	: Character stitch (Handwriting font)
	: Character stitch (Outline)
	: Character stitch (Japanese font)

(2)

Presser foot

Shows presser foot to be used. Before sewing, install the presser foot indicated here.

	Zigzag foot "J"		Blind stitch foot "R"
	Monogramming foot "N"		Button fitting foot "M"
	Overcasting foot "G"		Side cutter "S"
	Buttonhole foot "A"

* The symbols for certain presser feet, such as zipper foot "I" and the quilting foot, may not appear in the screen.

(3)

Single/repeat sewing

Shows single or continuous patterns sewing mode setting.

	: Single sewing mode
	: Repeat sewing mode

(4)

Reinforcement priority

Shows that reinforcement priority has been set to "

(5)

Width control

Shows that the stitch width can be adjusted using the sewing speed controller.

(6)

Needle position setting

Shows single or twin needle mode setting, and the needle stop position.

	: Single needle/down position
	: Single needle/up position
	: Twin needle/down position
	: Twin needle/up position

(7)

Initial needle position

Shows either "1 Straight stitch (Left)" or "3 Straight stitch (Middle)" as the utility stitch that is automatically selected when the machine is turned on.