SDX2200D

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I perform the initial setting (position adjustment) for region embossing?


Perform the region emboss initial setting according to the following procedure.


Prepare the following.

Paper Adjustment sheet for region embossing (included in the box)
image
Mat

Low Tack Adhesive Mat

Blade Auto Blade (Black)

 

  • Adjustment sheet for region embossing can be substituted with thick paper with one white side.
    Size : 12" × 12" (305 mm × 305 mm)
    Thickness: Thick paper equivalent to 150 g/m2 through 200 g/m2
  • Perform the region emboss initial setting by auto blade. Even if you have the optional Standard Cut Blade Holder, use the auto blade to cut the Adjustment sheet for region embossing.



 

  1. Select Region Emboss on page 2 of the Home screen.

    image




     
  2. Press the Create template to perform the region emboss initial setting .

    image



     
  3. Press OK key.
    You can also follow the on-screen instructions.

    image



     
  4. Attach the Adjustment sheet to the low tack adhesive mat.
    Make sure that the printed side is facing up and the arrow and black bar in first when attaching the sheet to the mat.

    image


     
  5. Install the auto blade holder into the carriage of the machine.




     
  6. Load the mat into the machine.

    image



     
  7. Press Start key to start cutting.

    image




     
  8. Press OK key when the cutting is finished.

    image




     
  9. Press image  to upload the mat, and then peel off the material from the mat.




     
  10. Fold the Adjustment Sheet in half along the dotted line as shown the following illustration.

    image



     
  11. Overlap image.
    Referring to the numbers below the rectangles, press image or image to enter the number for the cutout that is perfectly aligned on the left and right.

    image




     
  12. Press the OK key.




     
  13. Press the OK key.

    image
    >> The region emboss initial setting is finished.
    Continue to perform region embossing referring to the Instruction Manual for Embossing Starter Kit.

▲TOP

 

 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

SDX1200, SDX135, SDX2200D, SDX2240D, SDX2250D, SDX900, SDXTL

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.